 |
|
|
PV310: high speed compact system
|
|
The PV310 is a universal compact image processing system. With over 6000 checking options, it is suitable for all commercial industrial checks such as assembly monitoring, type differentiation or measurements. Its particular strengths lie in the very high evaluation speed and the powerful testing methods for recognizing surface defects or edge chipping.
The Micro-Imagechecker PV310 represents the Panasonic principle of offering powerful, reliable systems that help to securely resolve checking tasks. The simple operation, wide range of functions and high flexibility allows costs in production to be reduced.
|
|
|
|
Impressive checking speed for high cycle rates
|
Thanks to the double processor system, consisting of a special image processor for pre-processing and a high-performance RISC-CPU, the PV310 is perfectly suited to rapid evaluations and helps save valuable production time. It works significantly faster than the previous model thanks to optimization of the hardware and software.
 |
|
Approx. 40x faster - Grey value checking
The grey value check determines the average brightness of a test window. As the process works without threshold values, it is extremely stable.
Previous model: 69ms
PV310: 1.7ms
(Scanning area: 486x452 pixels, no position correction)
|
| |
|
|
 |
|
Approx. 16x faster - Feature extraction
Geometric features such as circumference, area, angle, circumscribed square or number of objects can be simultaneously recorded with just one checking window. The feature extraction is suitable, e.g. for assembly checks.
Previous model: 61ms
PV310: 3.9ms
(Scanning area: 486x452 pixels, no position correction)
|
| |
|
|
 |
|
Approx. 10x faster - Measuring
The PV310 can record distances or positions extremely accurately. With the help of various parameters, it is possible to specifically suppress intereferences such as e.g. traces of dirt.
Previous model: 28ms
PV310: 2.7ms
(Scanning area: 200x160 pixels, no position correction)
|
|
|
|
|
Defect detection
|
|
During production, surfaces or edges must be continually checked for defects (e.g. spray burrs, cracks, scratches, punch errors, flash, etc.). These checks are usually very processor-intensive. Thanks to the high processor performance of the PV310, it is now possible to economically implement these checking tasks with a compact image processing system.
To zoom in, click on the required image.
 |
|
Top safety
Special procedures developed in-house help the system to achieve a high recognition safety and impressive insensitivity to interfering factors. This means that e.g. errors down to a few pixels can be detected. Fluctuations in brightness also do not affect the evaluation.
Zoom image |
| |
|
|
 |
|
Simple set-up
Set-up is very simple. After setting the checking parameters, all that is needed is to roughly position the checking window. If the size or position of the part fluctuates, they are precisely tracked.
Zoom image |
|
|
Ionizers
Products
