 |
|
|
Wafer mapping sensor
|
|
For more safety and more sensing accuracy, we studied the requirements for future wafer mapping sensors from various aspects. Our answer is the LED beam reflective type wafer mapping sensor M-DW1. This sensor uses LEDs as a light source for safe operation and 2-segment receiving element for more accurate position detection. Characteristics: - Precise position detection
- Red light LED with fixed focus reflective beam
- High-speed response time: 0.5ms
- Off-delay timer selectable
- Teach-in adjustment makes it user-friendly
- 4 sensitivity levels are adjustable via DIP switch or external
- Light ON/dark ON
|
|
|
| | M-DW1 | | Sensor type | LED beam reflective type wafer mapping sensor | | Center measuring distance | 45mm | | Response time | Max. 0.5ms | | Output transistor | NPN / PNP max. 100 mA | | Emitting diode | Red light LED | | Rated current consumption without load | Max. 65mA | | Housing material | ABS, stainless steel | | Protection | IP67 | | Size (HxWxL) | 18.3 x 80.6 x 50mm | | Connection method | Cable 300mm long | | Operating voltage | 12 to 24V DC (± 10%) | | Usable ambient temp. | 0°C to +55°C | | Weight (approx.) | 75g |
|
|
|
|
|
M-DW1 typical applications
|
|
|
|
Ionizers
Products
