 |
|
|
Water detection sensor
|
|
These special thru-beam sensors are used for checking fluid levels and detecting the level of liquids containing water. The particularly strong IR beam of the emitter penetrates not only transparent, but also semitransparent or coloured containers such as PFA packages or shampoo bottles. The sensitivity of the sensor is adjustable, which allows foam to be distinguished from liquid in drinks, for example. Characteristics: - Suitable for coloured and semitransparent containers or packages
- Not affected by droplets, air bubbles or foam
- Compact design
- Short-circuit protected
- Light ON/dark ON
- Sealed to IP67
- M8 plug-in or cable connection (-J)
Accessories: - Slit masks
- Mounting brackets
|
|
|
| NPN output |
EZ-11 (-J) |
| PNP output |
EZ-11-PN (-J) |
| Sensor type |
Thru-beam |
| Rated sensing distance |
Max. 5m |
| Sensing range |
0 - 5m |
| Standard detectable object |
Liquid with water molecules (in transparent or semi-opaque containers, min. Ø >/= 2mm |
| Hysteresis |
-- |
| Response time |
Max. 12ms |
| Output transistor |
Max. 100mA |
| Emitting diode |
Infrared LED |
| Rated current consumption without load |
Emitter: max. 25mA
Receiver: max. 25mA |
| Housing material |
Plastic |
| Protection |
IP67 |
| Physical size (HxWxL) |
31 x 12 x 20mm |
| Connection method |
M8 connector (-J) or cable 2m |
| Operating voltage |
12 - 24V DC (± 10%) |
| Usable ambient temperature |
0°C to +55°C |
| Weight (approx.) |
Emitter: 45g
Receiver: 50g |
|
|
|
|
|
EZ-10 typical applications
|
Fluid level monitoring
|
Detection of oil/water level
|
Detection of liquids
|
|
|
Ionizers
Products
